Raisecom ISCOM2600G-HI (A) Series User Manual

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
2 Ethernet
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
50
2 Ethernet
This chapter describes basic principles and configuration procedures for Ethernet, and
provides related configuration examples, including the following sections:

MAC address table

VLAN

PVLAN

QinQ

VLAN mapping

STP/RSTP

MSTP

MRSTP

Loop detection

Interface protection

Port mirroring

L2CP

Voice VLAN

GARP
2.1 MAC address table
2.1.1 Introduction
The MAC address table records mappings between MAC addresses and interfaces. It is the
basis for an Ethernet device to forward packets. When the Ethernet device forwards packets
on Layer 2, it searches the MAC address table for the forwarding interface, implements
expedited forwarding of packets, and reduces broadcast traffic.
The MAC address table contains the following information:

Destination MAC address

Destination MAC address related interface number

Interface VLAN ID

Flag bits

Raisecom ISCOM2600G-HI (A) Series Specifications

General

Brand	Raisecom
Model	ISCOM2600G-HI (A) Series
Category	Switch
Language	English