Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
none, md5nopriv, shapriv, md5priv, and shanopriv
users (default)
Mapping relationship between
SNMP user and access group
Index GroupName UserName SecModel
-----------------------------------------------------------
0 initialnone none usm
1 initial md5priv usm
2 initial shapriv usm
3 initial md5nopriv usm
4 initial shanopriv usm
Logo and the contact method of
the administrator
12.1.4 Configuring basic functions of SNMPv1/SNMPv2c
To protect itself and prevent its MIB from unauthorized access, the SNMP Agent proposes the
concept of community. Management stations in the same community must use the community
name in all Agent operations, or their requests will not be accepted.
The community name is used by different SNMP strings to identify different groups. Different
communities can have read-only or read-write access permission. Groups with read-only
permission can only query the device information, while groups with read-write access
permission can configure the ISCOM2600G-HI series switch in addition to querying the
device information.
SNMPv1/SNMPv2c uses the community name authentication scheme, and the SNMP packets
of which the names are inconsistent to the community name will be discarded.
Configure basic functions of SNMPv1/SNMPv2c for the ISCOM2600G-HI series switch as
below.
Enter global configuration mode.
Raisecom(config)#snmp-
server view
view
-
name
oid-tree
[
mask
]
{ excluded |
included }
(Optional) create SNMP view and configure MIB
variable range.
The default view is internet view. The MIB
variable range contains all MIB variables below
"1.3.6" node of MIB tree.
To Next Page
Loading...
Need help?
General
