Raisecom ISCOM2600G-HI (A) Series User Manual

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
1 Basic configurations
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
44
1.7.9 Checking configurations
Use the following commands to check configuration results.
No.
Command
Description
1
Raisecom#show interface [ range ]
[ interface-type interface-number ]
Show the interface status. The
device supports showing
blocked VLANs.
2
Raisecom#show l2protocol peer stp
[ interface-type interface-number ]
Show status of L2protocol
Peer STP on the interface.
3
Raisecom#show interface interface-type
interface-number statistics [ dynamic ]
[ detail ]
Raisecom#show interface statistics
dynamic [ detail ]
Show interface statistics.
4
Raisecom#show interface brief
Show the interface list.
5
Raisecom#show interface [ interface-
type interface-number ] description
Show the interface description.
1.8 Configuring basic information
Configure basic information for the ISCOM2600G-HI series switch as below.
Step
Command
Description
1
Raisecom#host
name name
(Optional) configure the device name.
The device name is within 64 characters in length, and
supports special characters, such as " ", "\", "'", "<", ">", and
"&".
By default, the device name is Raisecom.
The system supports changing device name to make users
distinguish different devices on the network. Once the device
name changes, it can be seen in terminal prompt.
2
Raisecom#lang
uage
{ chinese |
english }
(Optional) configure language mode.
By default, the language is English.

Raisecom ISCOM2600G-HI (A) Series Specifications

General

Brand	Raisecom
Model	ISCOM2600G-HI (A) Series
Category	Switch
Language	English