Raisecom ISCOM2600G-HI (A) Series User Manual

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
8 Multicast
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
353
Figure 8-13 Multicast VLAN copy networking
Prerequisite
Create VLANs, and add related interfaces to VLANs.
8.7.3 Default configurations of multicast VLAN copy
Default configurations of multicast VLAN copy are as below.
Function
Default value
Global multicast VLAN copy status
Disable
Interface multicast VLAN copy status
Disable
Multicast VLAN and group address set
N/A

To concurrently configure N:1 VLAN mapping and VLAN copy, you must configure
VLAN copy and then configure N:1 VLAN mapping.

To concurrently configure N:1 VLAN mapping and PIM, you must configure PIM
and then configure N:1 VLAN mapping.
8.7.4 Configuring multicast VLAN copy
Configure multicast VLAN copy for the ISCOM2600G-HI series switch as below.

Raisecom ISCOM2600G-HI (A) Series Specifications

General

Brand	Raisecom
Model	ISCOM2600G-HI (A) Series
Category	Switch
Language	English