Raisecom ISCOM2600G-HI (A) Series - Default Configurations of MRSTP; Enabling MRSTP; Configuring MRSTP Parameters

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
2 Ethernet
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
117
2.8.3 Default configurations of MRSTP
Default configurations of MRSTP are as below.
Function
Default value
MRSTP process
0
Interface MRSTP status
Enable
Device MRSTP priority
32768
Interface MRSTP priority
128
Path cost of the interface
0
Max Age timer
20s
Hello Time timer
2s
Forward Delay timer
15s
2.8.4 Enabling MRSTP
Enable MRSTP for the ISCOM2600G-HI series switch as below.
Step
Command
Description
1
Raisecom#config
Enter global configuration mode.
2
Raisecom(config)#spanning-tree
enable
Enable STP.
3
Raisecom(config)#spanning-
treemode mrstp
Configure the mode of the spanning
tree to MRSTP.
4
Raisecom(config)#spanning-tree
mrstp pro-id
Create an MRSTP.
5
Raisecom(config)#interface
interface-type interface-number
Enter physical layer interface
configuration mode.
6
Raisecom(config-
gigaethernet1/1/port)#spanning-
tree mrstp pro-id
Bind the interface to the specified
process.
2.8.5 Configuring MRSTP parameters
Configure MRSTP parameters for the ISCOM2600G-HI series switch as below.
Step
Command
Description
1
Raisecom#config
Enter global configuration mode.
2
Raisecom(config)#spanning-tree
mrstp pro-id priority priority
(Optional) configure the priority of
the specified process.