Raisecom ISCOM2600G-HI (A) Series User Manual

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
8 Multicast
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
358
Step
Command
Description
3
Raisecom(config)#mld snooping vlan
vlan-list
(Optional) enable MLD
Snooping in all VLANs.
4
Raisecom(config)#vlan vlan-id
Raisecom(config-vlan)#mld snooping
static ip-address [ interface-type
interface-number ]
(Optional) configure the static
member of MLD Snooping in
VLAN mode.
5
Raisecom(config)#interface
interface-type interface number
Raisecom(config-
gigaethernet1/1/1)#mld snooping
group-address vlan vlan-id
(Optional) configure the host
joining function for MLD
Snooping on the interface.
8.8.6 Configuring MLD Querier
Configure MLD Querier for the ISCOM2600G-HI series switch as below.
Step
Command
Description
1
Raisecom#config
Enter global configuration mode.
2
Raisecom(config)#mld
querier
Enable MLD querier.
3
Raisecom(config)#mld
source-ip ip-address
(Optional) configure the source IP address for
MLD Querier to send Query packets.
4
Raisecom(config)#mld
query-interval seconds
(Optional) configure the MLD query interval.
5
Raisecom(config)#mld
query-max-response-time
seconds
(Optional) configure the maximum response
time of Query packets.
6
Raisecom(config)#mld
last-member-query-
interval seconds
(Optional) configure the interval for the last
member to send Query packets.
7
Raisecom(config)#mld
robust-count value
Configure the robustness factor of MLD.
8
Raisecom(config)#mld
proxy
Enable MLD Proxy.

When IGMP Querier is disabled, the following parameters can be configured:
source IP address, query interval, maximum response time to send Query packets,
and interval for the last member to send Query packets. After IGMP Querier is
enabled, these configurations will take effect immediately.

MLD proxy and MLD Querier are mutually exclusive. MLD proxy and MLD report-
suppression are mutually exclusive.

Raisecom ISCOM2600G-HI (A) Series Specifications

General

Brand	Raisecom
Model	ISCOM2600G-HI (A) Series
Category	Switch
Language	English