Raisecom ISCOM2600G-HI (A) Series User Manual

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
1 Basic configurations
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
2

Commands are classified into different levels. You can execute the commands that
correspond to your level only.

The commands available to you depend on which mode you are currently in.

Shortcut keys can be used to execute commands.

Check or execute a history command by checking command history. The last 20 history
commands can be saved on the ISCOM2600G-HI series switch.

Enter a question mark (?) at the system prompt to obtain online help.

The ISCOM2600G-HI series switch supports multiple intelligent analysis methods, such
as fuzzy match and context association.
1.1.2 Privileges
The ISCOM2600G-HI series switch uses hierarchical protection methods to divide commands
into 16 privileges in an ascending order.

Privileges 0–4: viewing privilege. Users can execute viewing commands, such as the
ping, clear, and history commands.

Privileges 5–10: monitoring privilege. Users can execute monitoring commands, such as
the show command.

Privileges 11–14: configuring privilege. Users can execute commands for configuring
different services, such as Virtual Local Area Network (VLAN) and Internet Protocol
(IP).

Privilege 15: administering privilege. Users can execute basic commands for
administering the system.
1.1.3 Modes
Command line mode is the CLI environment. All system commands are registered in one (or
multiple) command line mode, the command can only run in the corresponding mode.
Establish a connection with the ISCOM2600G-HI series switch. If the ISCOM2600G-HI
series switch is in default configuration, it will enter user EXEC mode, and the screen will
display:
Raisecom#
In privileged EXEC mode, use the config command to enter global configuration mode.
Raisecom#config
Raisecom(config)#

The CLI prompts that Raisecom is a default host name. You can modify it by using
the hostname name command in privileged EXEC mode.

Commands executed in global configuration mode can also be executed in other
modes. The functions vary on command modes.

Raisecom ISCOM2600G-HI (A) Series Specifications

General

Brand	Raisecom
Model	ISCOM2600G-HI (A) Series
Category	Switch
Language	English