Raisecom ISCOM2600G-HI (A) Series - Figure 5-2 Configuring ARP Networking

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
5 IP services
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
216
Figure 5-2 Configuring ARP networking
Configuration steps
Add a static ARP entry.
Raisecom#config
Raisecom(config)#arp 192.168.1.10 0050.8d4b.fd1e
Checking results
Use the show arp command to show configurations of the ARP address table.
Raisecom#show arp
ARP aging-time: 1200 seconds(default: 1200s)
ARP mode: Learn all
ARP table:
Total: 1 Static: 1 Dynamic: 0
Age(s) status
-------------------------------------------------------------------------
192.168.1.10 0050.8D4B.FD1E vlan10 static -- PERMANENT