Raisecom ISCOM2600G-HI (A) Series User Manual

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
12 System management
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
516
Step
Command
Description
Raisecom(config)#logging history
size size
(Optional) configure the log
history list size.
Raisecom(config)#logging trap [ log-
level | alerts | critical |
debugging | emergencies | errors |
informational | notifications |
warnings | distriminator
distriminator - number ]
(Optional) enable translating
specified logs in the history
list to Traps.
Configurations may fail if
the system logs are not
output to the log history list.
12.5.6 Checking configurations
Use the following commands to check configuration results.
No.
Command
Description
1
Raisecom#show logging
Show configurations of system log.
2
Raisecom#show logging
buffer
Show information about the system log buffer.
3
Raisecom#show logging
discriminator
Show filter information.
4
Raisecom#show logging
file
Show contents of system log. The device
supports this configuration at millisecond level.
5
Raisecom#show logging
history
Show information about the system log history
list.
12.5.7 Maintenance
Maintain the ISCOM2600G-HI series switch as below.
Command
Description
Raisecom(config)#clear logging buffer
Clear log information in the buffer.
Raisecom(config)#clear logging
statistics
Clear log statistics.
12.5.8 Example for configuring outputting system logs to log host
Networking requirements
As shown in Figure 12-10, configure system log, and output device log information to log
host for user to check.

Raisecom ISCOM2600G-HI (A) Series Specifications

General

Brand	Raisecom
Model	ISCOM2600G-HI (A) Series
Category	Switch
Language	English