Raisecom ISCOM2600G-HI (A) Series - Establishing ISF environment

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
2 Ethernet
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
130
Figure 2-24 Port mirroring networking
Configuration steps
Enable port mirroring on the Switch.
Raisecom#config
Raisecom(config)#mirror-group 1
Raisecom(config)#interface gigaethernet 1/1/3
Raisecom(config-gigaethernet1/1/3)#mirror-group 1 monitor-port
Raisecom(config-gigaethernet1/1/3)#exit
Raisecom(config)#interface gigaethernet 1/1/1
Raisecom(config-gigaethernet1/1/1)#mirror-group 1 source-port ingress
Checking results
Use the show mirror command to show configurations of port mirroring.
Raisecom#show mirror-group
Mirror Group 1 :
Monitor Port :
gigaethernet1/1/3
Source Port :
gigaethernet1/1/1 : ingress
gigaethernet1/1/2 : ingress
Remote Vlan: --