Raisecom ISCOM2600G-HI (A) Series - Maintenance; CFM (IEEE 802.1 Ag;Itu-Y.1731); Introduction

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
9 OAM
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
370
No.
Command
Description
3
Raisecom#show oam loopback
[ gigaethernet interface-number ]
Show configurations of link
monitoring and fault
indication of EFM OAM.
4
Raisecom#show oam notify
[ gigaethernet interface-number ]
Show statistics on EFM OAM
packets.
5
Raisecom#show oam peer event
[ gigaethernet interface-number ]
[ critical ]
Show configurations of EFM
OAM event Trap.
6
Raisecom#show oam peer link-
statistic [ gigaethernet interface-
number ]
Show information about local
critical faults detected by the
EFM OAM interface.
7
Raisecom#show oam statistics
[ gigaethernet interface-number ]
Show information about the
peer EFM OAM device.
8
Raisecom#show oam trap
[ gigaethernet interface-number ]
Show information about the
peer EFM OAM and interface
statistical variable.
9.2.8 Maintenance
Maintain the ISCOM2600G-HI series switch as below.
Command
Description
Raisecom(config-gigaethernet1/1/1)#clear
oam statistics
Clear statistics on links of the
EFM OAM interface.
Raisecom(config-gigaethernet1/1/1)#clear
oam event
Clear EFM OAM link events.
Raisecom(config)#clear oam config
Clear EFM OAM configurations.
9.3 CFM (IEEE 802.1ag/ITU-Y.1731)
9.3.1 Introduction
Connectivity Fault Management (CFM) is a network-level Ethernet OAM technology,
providing end-to-end connectivity fault detection, fault notification, fault judgement, and fault
location. It is used to diagnose fault actively for Ethernet Virtual Connection (EVC), provide
cost-effective network maintenance solution, and improve network maintenance through the
fault management function.
The ISCOM2600G-HI series switch provides CFM that is compatible with both ITU-Y.1731
and IEEE 802.1ag standards.