Raisecom ISCOM2600G-HI (A) Series - Appendix; Terms

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
12 System management
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
507
Figure 12-9 LLDP networking
Configuration steps
Step 1 Enable global LLDP and LLDP alarm.
Configure Switch A.
Raisecom#name SwitchA
SwitchA#config
SwitchA(config)#lldp enable
Configure Switch B.
Raisecom#name SwitchB
SwitchB#config
SwitchB(config)#lldp enable
Step 2 Configure the management IP address.
Configure Switch A.
SwitchA(config)#create vlan 1024 active
SwitchA(config)#interface gigaethernet 1/1/1
SwitchA(config-gigaethernet1/1/1)#switchport access vlan 1024
SwitchA(config-gigaethernet1/1/1)#exit
SwitchA(config)#interface vlan 1024
SwitchA(config-vlan1)#ip address 10.10.10.1 255.255.255.0
SwitchA(config-vlan1)#exit