Raisecom ISCOM2600G-HI (A) Series User Manual

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
10 Security
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
399
Step
Command
Description
2
Raisecom(config)#access-list acl-
number [ name acl-name ]
Create an ACL, and enter ACL
configuration mode.

When the ACL number is
1000–1999, this configuration
enters basic IP ACL
configuration mode.

When the ACL number is
2000–2999, this configuration
enters extended IP ACL
configuration mode.

When the ACL number is
3000–3999, this configuration
enters MAC ACL
configuration mode.

When the ACL number is
5000–5999, this configuration
enters User ACL
configuration mode.

When the ACL number is
6000–6999, this configuration
enters IPv6 ACL
configuration mode.

When the ACL number is
7000–7999, this configuration
enters advanced ACL
configuration mode.
3
Raisecom(config-acl-ip-std)#rule
[ rule-id ] { deny | permit }
{ source-ip-address source-ip-mask |
any }
(Optional) configure the
matching rule for basic IP ACL.
4
Raisecom(config-acl-ip-ext)# rule
[ rule-id ] { deny | permit }
{ protocol-id | icmp | igmp | ip }
{ source-ip-address source-ip-mask |
any } { destination-ip-address
destination-ip-mask | any } [ dscp
dscp-value ] [ ttl ttl-value ]
[ fragment ] [ icmp-type icmp-type-
value ] [ precedence precedence-
value ] [ tos tos-value ] [ time-
range time-range-name ]
(Optional) configure the
matching rule for extended IP
ACL.

Raisecom ISCOM2600G-HI (A) Series Specifications

General

Brand	Raisecom
Model	ISCOM2600G-HI (A) Series
Category	Switch
Language	English