Trimble FM-1000 - Page 170

Autopilot system 8 Vehicle guidance setup
Setting Explanation
setting to be On.
Valve on Speed
l Normal: Speed threshold >0.4 m/s (1.3 ft/s). For normal
operating speeds.
l Low: Speed threshold >0.1 m/s (0.3 ft/s). For vehicles operating
and very slow speeds.
l Ultra Low: Speed threshold >0.2 m/s (0.7 ft/s). For vehicles
operating and very slow speeds.
Note –
The NavControllermust have firmware version 5.10 or higher to
support low and ultralow settings.
Legacy Sensors
For older Autopilot systems that use the electrical system to
measure vehicle status.
l None
l Wheel Speed Only
l Gear Level Only
l Wheel and Gear
This list is only available when AutoSense is set to Off.
Advanced settings for Autopilot system
Advanced settings are located in the Advanced tab. For more information regarding the Advanced tab
settings, contact your local reseller.
170 FM-1000 Integrated Display User Guide Version 9.25, Revision B