16 Water Management setup FieldLevel II Survey/Design
Setting Explanation
Relative Heights
Select Enabled from the list.
By default, coordinates are recorded relative to the master
benchmark. Setting the relative positions establishes the
coordinates of the master benchmark when it is set. These
coordinates are then used for field leveling and topographic
mapping every time the field is opened.
Relative X X-axis coordinate (Relative X)
Relative Y Y-axis coordinate (Relative Y)
Height Offset height (Height Offset)
Force Re-bench
Whether the system will force you to re-bench each time that
you reload the field.
Note –
If you choose No, the RTK base station must be placed in
exactly the same position for the field to be correct.
4. Tap OK to return to the Survey Setup screen.
Tip – To view relative offset values on the Run screen, set the offsets as status text items on the slide-out
tab.
For operational information, see Create / save a design (page 435).
Version 9.25, Revision B FM-1000 Integrated Display User Guide 299
To Next Page
Loading...