Basic system settings 3 Basic settings
Setting Explanation
LED spacing
The distance represented by each LED on the lightbar.
a. Tap the appropriate number field.
b. Enter the required values.
Default: 3 cm per LED/1" per LED
Display Mode How the LEDs respond to offline distances. When “Show
error” is selected, the display shows the direction that you
need to move in. When Show correction is selected, the display
shows your current distance offline.
a. From the list, tap the appropriate option.
b. Enter the virtual lightbar settings, then tap
OK
.
c. At the
Lightbars Configuration
screen, tap
OK
.
Default:show error (chase mode)
64 FM-1000 Integrated Display User Guide Version 9.25, Revision B
To Next Page
Loading...