3 Basic settings Basic system settings
Status Item Explanation
Impl. Latitude Implement's current latitude
Impl. Long-Term XTE Implement Cross Track Error (XTE) when passes occur more than
one hour apart
Impl. Longitude Implement's current longitude
Impl. Network ID RTK network ID of the implement receiver's corrections
Impl. North Distance that the implement is to the north of the field origin point
(a negative number means the implement is to the south of the
field origin point)
Impl. Nudge/Trim Amount of nudge or trim currently applied to the implement
position
Impl. Offline Dist Distance away from the guidance line
Impl. Satellites Number of satellites the implement receiver is reading
Impl. Short-term XTE Implement pass-to-pass Cross Track Error (XTE) when passes occur
within less than 15 minutes
Impl. Speed Current implement speed
Impl. Steering Angle Steering angle of the implement
Impl. Up Vertical height of the implement relative to the field origin point (a
negative number means the implement is lower than the field origin
point)
Impl. Vehicle Model Implement profile name
Implement Name of the current implement
Implement F/B Offset Distance of front to back offset
Implement L/R Offset Distance of left to right offset
Implement Width Width of the implement
Latitude Vehicle's current latitude
Line Feature Length Length of the current line feature
Local Time Current local time
Long-term XTE Vehicle Cross Track Error (XTE) when passes occur more than one
hour apart.
Longitude Vehicle's current longitude
Version 9.25, Revision B FM-1000 Integrated Display User Guide 75
To Next Page
Loading...