Basic system settings 3 Basic settings
Status Item Explanation
Longitude Vehicle's current longitude
NDVI Normalized Difference Vegetation Index
Nearest Point Name Bame of the nearest point feature
Network ID RTK network ID of the GPS receiver's corrections
Network Status Current status of the wireless cellular network
North Distance that the vehicle is to the north of the field origin point (a
negative number means the vehicle is to the south of the field origin
point)
Nudge Amount of nudge currently applied
Nudge/Trim Amount of nudge or trim currently applied
Offline Dist. Distance away from the guidance line
Offset X Relative Position X offset from the master benchmark
Offset Y Relative Position Y offset from the master benchmark
P Altitude Current height of the vehicle as reported by the primary blade GPS
receiver
P Blade Height Current height of the primary blade
P Boot Depth Depth of the boot when installing tiles or the depth of the blade
when cleaning surface ditches (used with the Autoslope leveling
model)
P CMR Percent Percentage of radio CMR packets received over the last 100 seconds
by the primary blade GPS receiver
P Correction Age Time since the GPS corrections were last received from the primary
FieldLevel™ GPS receiver
P Correction Type Correction type used by the primary blade receiver
P Cut/Fill Difference between the Primary Blade Height and the Primary
Target Height:
l When Cut is shown, the current ground height is above the
target height. The height adjustment indicator shows a red
down arrow, which means that the blade needs to move down
to reach the Target Height.
l When fill is shown, the current ground height is below the
target height. The height adjustment indicator shows a red up
76 FM-1000 Integrated Display User Guide Version 9.25, Revision B
To Next Page
Loading...