April 2017
4-166
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
REP 70.5
Launch Issue
Repairs and Adjustments
5. When both cables are slack, disengage the lift shaft (1) from the frame. Then slide the
tray cable pulley (2) to the front of the lift shaft to release the rear lift cable ends (3) that
are trapped in the pocket underneath the tray cable pulley, Figure 4.
Figure 4 Releasing the cable ends
6. Remove the rear tray cables, Figure 5:
a. Remove the E-ring, wire guide and pulley (1).
b. Remove the cables (2).
Figure 5 Rear cables removal
To Next Page
Loading...
