Delta ASDA-A2 User Manual

ASDA-A2 Chapter 4 Panel Display and Operation
4-4 Revision February, 2017
Edit Setting Mode
Parameter
Mode
‧‧‧
Editing Setting Mode
Display parameter setting value
Save the parameter
setting value. Then,
returns to Parameter
Mode.
Monitoring /
Alarm Mode
‧‧‧
‧‧‧
MODE SET
SHIFT
SET
SET
SET
MODE
If no alarm occurs, then the Alarm Mode will be skipped.
Save the parameter
setting value. Then,
returns to Parameter
Mode.
Save the parameter
setting value. Then,
returns to Parameter
Mode.
SHIFT

Delta ASDA-A2 Specifications

General

Control Mode	Position, Speed, Torque
Model	ASDA-A2 Series
Operating Voltage	200 ~ 230VAC / 380 ~ 480VAC
Power Supply	200-230VAC ±10%, single-phase
Communication Interface	RS-485, CANopen
Feedback	Incremental encoder, Absolute encoder
Protection	Overcurrent, Overvoltage, Undervoltage, Overheating, Short Circuit
Operating Temperature	0°C
Storage Temperature	-20°C
Humidity	20% to 90% RH (non-condensing)
Position Control Mode Features	Electronic Cam
Weight	Varies depending on the model. Please refer to the specific model's datasheet.