Chapter 8 Parameters ASDA-A2
8-176 Revision February, 2017
Range:
1 ~ 65500
Data Size:
16-bit
Format:
Decimal
Settings:
Please refer to P5-20 for the setting of acceleration/deceleration time in
PR mode.
P5-34 AC14 Acceleration/Deceleration Time (Number #14)
Address: 0544H
0545H
Operational
Interface:
Panel / Software Communication
Related Section:
7.10
Default:
50
Control
Mode:
PR
Unit:
ms
Range:
1 ~ 1500
Data Size:
16-bit
Format:
Decimal
Settings:
The default value of this parameter is smaller (short deceleration time)
and it is used for deceleration time setting of auto protection.
P5-35 AC15 Acceleration/Deceleration Time (Number #15)
Address: 0546H
0547H
Operational
Interface:
Panel / Software Communication
Related Section:
7.10
Default:
30
Control
Mode:
PR
Unit:
ms
Range:
1 ~1200
Data Size:
16-bit
Format:
Decimal
Settings:
The default value of this parameter is smaller (short deceleration time)
and it is used for short deceleration time and stops promptly of auto
protection.