Delta ASDA-A2 User Manual

ASDA-A2 Chapter 8 Parameters
Revision February, 2017 8-21
P0-10★
CM2 Status Monitor Register 2
Address: 0014H
0015H
Operational
Interface：
Panel / Software Communication
Related Section:
4.3.5
Default：
-
Control
Mode：
ALL
Unit：
-
Range：
-
Data Size：
32-bit
Format：
Decimal
Settings：
The setting value which is set by P0-18 should be monitored via P0-10.
(Please refer to Chapter 7.2.1, Description of Monitoring variable for
the setting value.) Set P0-02 to 24, the panel displays VAR-2 first, and
then shows the content of P0-10.
P0-11★
CM3 Status Monitor Register 3
Address: 0016H
0017H
Operational
Interface：
Panel / Software Communication
Related Section:
4.3.5
Default：
-
Control
Mode：
ALL
Unit：
-
Range：
-
Data Size：
32-bit
Format：
Decimal
Settings：
The setting value which is set by P0-19 should be monitored via P0-11.
(Please refer to Chapter 7.2.1, Description of Monitoring Variable for
the setting value.) Set P0-02 to 25, the panel displays VAR-3 first, and
then shows the content of P0-11.

Delta ASDA-A2 Specifications

General

Control Mode	Position, Speed, Torque
Model	ASDA-A2 Series
Operating Voltage	200 ~ 230VAC / 380 ~ 480VAC
Power Supply	200-230VAC ±10%, single-phase
Communication Interface	RS-485, CANopen
Feedback	Incremental encoder, Absolute encoder
Protection	Overcurrent, Overvoltage, Undervoltage, Overheating, Short Circuit
Operating Temperature	0°C
Storage Temperature	-20°C
Humidity	20% to 90% RH (non-condensing)
Position Control Mode Features	Electronic Cam
Weight	Varies depending on the model. Please refer to the specific model's datasheet.