Ford 2002 Bantam - Page 1380

417-01-56 Exterior Lighting 417-01-56
DIAGNOSIS AND TESTING (CONTINUED)
CONDITIONS
DETAILS/RESULTS/ACTIONS
N13: CHECK THE GROUND CONNECTION OF FRONT PARKING LAMP, RIGHT-HAND SIDE
1 Measure the resistance between headlamp,
right-hand side, connector C46, pin 6, circuit
31-LE30 (BK), harness side and ground.
• Is the resistance less than 2 ohms?
 Yes
CHECK the headlamp, right-hand side. If
necessary INSTALL a new one. TEST the
system for normal operation.
 No
REPAIR the open circuit(s) between head-
lamp, right-hand side and ground G9, by us-
ing the wiring diagrams. TEST the system
for normal operation.
N14: DETERMINE THE FAULT CONDITION
1 Determine the fault condition.
• Is the rear parking lamp, right-hand side
inoperative?
 Yes
GO TO N15
 No
GO TO N17
N15: CHECK THE POWER SUPPLY OF REAR PARKING LAMP, RIGHT-HAND SIDE
1.
Rear lamp as-
sembly, right-hand
side C42
2 Measure the voltage between rear lamp
assembly, right-hand side, connector C42,
circuit 29S-LF20 (OG), harness side and
ground.
• Is battery voltage indicated?
 Yes
GO TO N15
 No
REPAIR the open circuit(s) between splice
S10 and rear lamp assembly, right-hand
side, by using the wiring diagrams. TEST
the system for normal operation.
E9427 EN 07/2001 2002 Bantam
BACK TO CHAPTER INDEX
FORD BANTAM
CONTINUED
TO MODEL INDEX
PAGES FROM MANUAL