501-20B-52 Occupant Restraints — Passive — Supplemental Air 501-20B-52
Bag System
REMOVAL AND INSTALLATION (CONTINUED)
Installation
WARNING: Always wear safety glasses
when working on an air bag equipped
vehicle and when handling an air bag
module. Failure to follow this instruction
may result in personal injury.
WARNING: To minimize the possibility of
injury in the event of premature de-
ployment, always carry a live air bag
module with the bag and trim pointed
away from the body. Failure to follow
this instruction may result in personal
injury.
WARNING: To minimize the possibility of
premature deployment, live air bag
modules must only be placed on work-
benches, which have been ground,
bonded. Failure to follow this instruc-
tion may result in personal injury.
WARNING: Never probe the electrical
connectors of air bag modules or any
other supplemental restraint system
component. Failure to follow this in-
struction may result in personal injury.
WARNING: Painting over air bag module
trim covers could lead to deterioration
of the trim covers and air bag. Do not
for any reason attempt to paint discol-
oured or damaged air bag module trim
covers. Install a new component. Failure
to follow this instruction may result in
personal injury.
1. To install, reverse the removal procedure.
08/2001 2002 Bantam
To Next Page
Loading...
