303-01B-64 Engine — 1.6L / 1.3L RoCam 303-01B-64
IN-VEHICLE REPAIR (CONTINUED)
E6640 EN 07/2001 2002 Bantam
13. Separate the exhaust down pipe from the
exhaust manifold and position it to one side.
1. Remove the nuts.
2. Disconnect the hanger insulator.
• Remove and discard the gasket.
14. Lower the vehicle.
15. Remove the valve cover.
16. NOTE: The camshaft sprocket mark and
both colored links on the timing chain must
line up.
NOTE:
The camshaft sprocket timing mark
must be at the 12 o'clock position.
Set the engine to TDC on cylinder No. 1.
17. Remove the timing chain hydraulic
tensioner.
To Next Page
Loading...
