Ford 2002 Bantam - Page 472

303-01B-100 Engine — 1.6L / 1.3L RoCam 303-01B-100
DISASSEMBLY AND ASSEMBLY OF SUBASSEMBLIES (CONTINUED)
E6644 EN 07/2001 2002 Bantam
11. NOTE:
Keep all parts in order for
reassembly.
Remove the valves.
1. Exhaust valve.
2. Intake valve.
12. NOTE:
Keep all parts in order for
reassembly.
Remove the camshaft bearing caps and the
camshaft.
1. Remove the camshaft bearings caps.
2. Remove the camshaft.
Assembly
1. Install the camshaft and the camshaft
bearing caps.
1. Install the camshaft.
2. Install the camshaft bearing caps.
2. Install the valves.
1. Exhaust valve.
2. Intake valve.