303-01B-101 Engine — 1.6L / 1.3L RoCam 303-01B-101
DISASSEMBLY AND ASSEMBLY OF SUBASSEMBLIES (CONTINUED)
E6644 EN 07/2001 2002 Bantam
3. NOTE:
The valve seals are fully pressed in by
valve spring pressure.
Using the special tool, install the valve
seals.
4. Using the special tools, install the valve
spring.
1. Compress the valve spring and the valve
spring retainer.
2. Insert the valve collets.
5. Remove the camshaft bearing caps and the
camshaft.
1. Remove the camshaft bearing caps.
2. Remove the camshaft.
6. Install the hydraulic lash adjusters.
To Next Page
Loading...
