308-03-83 Manual Transaxle 308-03-83
DISASSEMBLY AND ASSEMBLY OF SUBASSEMBLIES (CONTINUED)
E1165 EN 07/2001
5. NOTE: Assembly the synchronizer before
fitting it.
Fit the 2nd gearwheel and synchronizer
assembly on the output shaft.
1. Outer synchronizer ring
2. Synchronizer cone
3. Inner synchronizer ring
4. 2nd gearwheel
5. Half rings
6. Retaining ring
6. NOTE: Double synchronizer shown - is used
for servicing.
Assemble the 3rd/4th gear synchronizer.
1. 3rd gearwheel
2. Inner synchronizer ring
3. Synchronizer cone
4. Outer synchronizer ring
7. Fit the third gear synchronizer ring.
1. Synchronizer ring
2. Third gearwheel
To Next Page
Loading...
