308-03-90 Manual Transaxle 308-03-90
ASSEMBLY (CONTINUED)
E4462 EN 07/2001
10. Fit the shift rod guide upper snap-ring.
1. Raise the guide sleeve.
2. Install the upper snap-ring.
3. Fit the housing gasket.
• Move the inner selector mechanism into
5th gear position (the 5th gear selector
rod moves downwards).
11. Move the inner selector mechanism into 5th
gear.
• Turn the auxiliary shift rod clockwise until
the reverse/5th gear gate is reached.
12. Move the inner gearshift linkage into 5th
gear.
• Press the auxiliary shift rod down
together with the shift rod.
13. Fit the measuring shim and secure it with a
blow from a punch.
1. Transmission housing
2. Measuring shim (3,8 mm thick)
3. Bearing cone
To Next Page
Loading...
