486 Upgrade and Maintenance Manual RX2540 M2
Front panel and external front connectors
Figure 363: Connecting the front panel cables
Ê Connect the front panel cable to the system board (1).
Ê If applicable, connect the front VGA cable from the system board (2).
Ê Connect the front USB3.0 cable from the system board (3).
Ê Carefully pull the front panel module into its bay and regard that the locking
mechanism snaps in (see circle and figure364 / 365).
V CAUTION!
Ensure that none of the cables are strained or damaged.
I The locking mechanism differs for the installations with LTO drives
because the drive need more place, so that an other locking recess point
is needed.
To Next Page
Loading...
