IDEC WindO/I-NV4 User Manual

5 WindO/I-NV4 Common Operations and Settings
2-72 WindO/I-NV4 User’s Manual
Cross Reference Dialog Box
On the Tag Editor, select the device address, and then click (Cross Reference) to show the screen type, screen
number, and part number where that device address is used.
Enter the device address in Device Address and click (Reflesh) to see the updated data.
Comment: Displays the comment of the address number.
Double clicking the cell allows you to edit the comment. The maximum number is 255 characters.
You can enter multi-line messages by inserting a newline.
To enter a multi-line comment, press and hold SHIFT and ENTER.
Used: Displays how many times each address number has used.
The device addresses of the MICRO/I and external devices are collectively managed in Tag Editor. Tag Editor
can be displayed with the following procedures.
• On the View tab, in the Workspace group, click (Tag Editor).
• Double click Tag Editor in the Project window.

IDEC WindO/I-NV4 Specifications

General

Brand	IDEC
Model	WindO/I-NV4
Category	Organizer
Language	English