IDEC WindO/I-NV4

5 Part Library Function
6-14 WindO/I-NV4 User’s Manual
5.4 How to use a registered library part on another computer
To use the library part registered in the custom library on another project, save it as a part library file (*.plf), and then
import it to a project. Parts library files are per category folder of the custom library.
●
Exporting library parts
1 Select the category folder to export from the custom library in the part library navigation, and click (Export) on the
toolbar.
The Save As dialog box is displayed.
2 Specify the save location and the file name, and then click Save.
The maximum number for the part library file name is 255 characters.
This concludes exporting part library file.
Export and import the parts library file (*.plf) to use library parts created by other user as well.
You cannot use periods and the following characters in the part library file name.
" * . / : < > ? \ |