IDEC WindO/I-NV4 User Manual

3 File Copy Function
29-30 WindO/I-NV4 User’s Manual
3.1 What Can Be Done with the File Copy Function
The file copy function is used to copy files between or within the external memory devices inserted in the MICRO/I.
Copying from SD memory card to USB flash drive
*1
, from USB flash drive to SD memory card
*1
, or from
USB flash drive to USB flash drive
*2
Copy files between an SD memory card and a USB flash drive
*1
, or between USB flash drives
*2
inserted in the
MICRO/I.
Internally copy files on an SD memory card
*1
Internally copy files on an SD memory card inserted in the MICRO/I.
Internally copy files on a USB flash drive
Internally copy files on a USB flash drive inserted in the MICRO/I.
*1 HG5G/4G/3G/2G-V, HG4G/3G, HG2G-5F only
*2 HG2J-7U only
3 File Copy Function
HG3G HG2G-5FHG5G-V HG4G-V HG3G-V HG2G-V HG2G-5T HG4G HG1G HG1P HG2J-7U
Copy
USB flash drive
File
MICRO/I
SD memory card USB flash drive
HG3G HG2G-5F HG4G
HG5G-V HG4G-V HG3G-V HG2G-V
HG2J-7U
HG3G HG2G-5F HG4G
HG5G-V HG4G-V HG3G-V HG2G-V
Copy
FileFile
SD memory card
MICRO/I
Copy
FileFile
USB flash drive
MICRO/I
HG3G HG2G-5F HG4G
HG5G-V HG4G-V HG3G-V HG2G-V
HG2J-7U
When the MICRO/I is under the Run Mode, HMI Special Internal Relay LSM23 is 1 while the File Copy
function is executed.

IDEC WindO/I-NV4 Specifications

General

Brand	IDEC
Model	WindO/I-NV4
Category	Organizer
Language	English