5 Social Media Function
28-64 WindO/I-NV4 User’s Manual
5.1 What Can Be Done with the Social Media Function
The social media function enables sending social media message such as text, screenshots of MICRO/I, etc. (tweets),
from the MICRO/I to the specified account (Twitter account) when a specified trigger condition is satisfied.
5.2 System Composition
An example system configuration for using the social media function is shown below.
Configure the MICRO/I Ethernet settings (IP address, subnet mask, default gateway) and connect to a local network.
5 Social Media Function
HG3G
HG2G-5FHG5G-V HG4G-V HG3G-V HG2G-V HG2G-5T
HG4G HG1G HG1P
HG2J-7U
Twitter API v1.1 is used to send social media messages, and it may not work due to changes in the
specifications of Twitter.
For Twitter API restrictions and how to use Twitter, please check the Twitter website. (December 2021)
(1) Configure the MICRO/I with the social media information (Twitter account, social media message, sending
conditions, etc.).
(2) When the trigger condition for the social media function is satisfied, MICRO/I connected to the local network
sends the social media message to the Twitter server.
(3) Twitter tweets are received by a smartphone and computer etc. (If you install the Twitter client in advance, you
can receive push notifications.)
Twitter server on the internet
MICRO/I
Local Network
Ethernet Communication (TCP/IP)
Remote Network
(1)
(3) (2)
Computer
Smartphone,
Mobile device
External device
External Network
(2)
For the local network settings, contact the administrator of the network which the MICRO/I is connected to.
To Next Page
Loading...
General