1 Overview
19-2 WindO/I-NV4 User’s Manual
1.2 Functions that Support Text Groups
The functions that support text groups are as follows.
Item Setting
Screen
Popup Screen Title
Password Input Screens Title
Drawings Text Text
Buttons
Bit Button Registration Text
Word Button Registration Text
Goto Screen Button Registration Text
Print Button Registration Text
Key Button Registration Text
Multi-Button Registration Text
Selector Switch Registration Text
Lamps
Pilot Lamp Registration Text
Multi-State Lamp Registration Text
Data Displays
Numerical Input Unit
Message Display Message
Message Switching Display Message
Alarm List Display Message
Alarm Log Display Message, Title
Data Log Display Label
Numerical Display Unit
Charts
Bar Chart X-axis and Y-axis scale labels
Line Chart X-axis and Y-axis scale labels
Alarm Log Messages displayed in data output as CSV
Data Log Labels displayed in data output as CSV
Operation Log Recorded item labels and event names displayed in data output as CSV
• When the text group is switched, the displayed Base Screen is reset. When the current screen is reset,
the displayed Popup Screen is closed and the internal devices restart as if the Base Screen is switched.
The behavior of the internal devices differs according to the internal devices. For details, refer to Chapter
33 “Internal Devices” on page 33-1.
• Enter the password for projects created with WindO/I-NV4 Ver. 1.11.4 or earlier using only 4 to 15
uppercase letters and numbers.
To Next Page
Loading...
General