To Next Page

To Previous Page

WindO/I-NV4 User’s Manual 24-23

3 Uploading

Online Function

3.2 Upload Dialog Box

This section describes the settings and buttons of the Upload dialog box.

■ Project Name

The project is saved with the currently displayed name. To change the project name, enter a new name for the file.

The maximum number is 50 characters.

■ Type Number

Displays the type number selected in project data downloaded to the MICRO/I.

■ Modified

Displays the time that project data downloaded to the MICRO/I was last saved in WindO/I-NV4.

■ Location

Specifies the location for saving uploaded project files.

Click to display the Browse folders dialog box. Select the location for saving, then click OK.

■ Upload files used in this project from the External Memory Device

To upload files located on an external memory device inserted in the MICRO/I that are used by the project together

with project data, select the file to be uploaded from the following.

Recipe Files, Picture Files, Sound Files

, Custom Web Page Files

■ Upload

Starts uploading of project data.

■ Cancel

Stops uploading of project data.

*1 This is applicable for HG2J-7U and models with an audio interface only.

You cannot use the following characters in the project name.

" * / : < > ? \ |

IDEC WindO/I-NV4 User Manual

Questions and Answers: