WindO/I-NV4 User’s Manual 22-1
22
Multimedia Function
This chapter describes how to register and play movie files played on the Video Display, how to save video and audio
to the external memory device before and after an event occurs, how to play saved video and audio, and how to
configure the video input.
This function is only supported by models that are equipped with a video interface.
1.1 How the Multimedia Function is Used
With its built-in video interface (VIDEO IN/OUT) and audio interface (AUDIO IN
*1
/OUT), a video camera or
microphone
*1
can be connected to the MICRO/I and used in the following ways. Multimedia function uses the SD
memory card as the external memory device.
• Register movie files to play with the MICRO/I and play the movie files on the Video Display
• Save video camera images and microphone audio
*1
to the external memory device before and after an event occurs.
*1 Recording sound function is for HG4G/3G only
*2 HG5G/4G/3G-V only
*3 This is applicable for HG4G/3G with a video interface only.
Chapter 22 Multimedia Function
1 Function and Settings
HG3G
HG2G-5F HG2G-5T
HG4G HG1G
HG3G
HG2G-5FHG5G-V HG4G-V HG3G-V HG2G-V HG2G-5T
HG4G HG1G HG1P
HG2J-7U
MICRO/I
Play
Play Stop Back Next
SD memory card
Movie Files
(avi format)
*2
(mp4 format)
*3
Movie File List
(MOVIE.LST)
HG4G HG3G
HG5G-V HG4G-V HG3G-V
Video
Camera
Microphone
Images
Audio
*1
MICRO/I
Saves
SD memory card
Movie Files
(avi format)
*2
(mp4 format)
*3
HG4G HG3G
HG5G-V HG4G-V HG3G-V
Video and audio since the
recording time before the event
has passed is discarded
Images and sound to save to the SD memory card
Retained video and audio Record from here
Before event occurs After event occurs
Event Occurs
0
1