3 Recipe Settings Dialog Box
18-8 WindO/I-NV4 User’s Manual
This section describes the items and buttons on the Recipe Settings dialog box and the Individual Settings dialog
box.
3.1 Recipe Settings Dialog Box
Use the Recipe Settings dialog box to collectively manage the save destination of data for recipes, the device
addresses for writing recipe values and reading values of device addresses, and those execution conditions.
■ Number of Blocks
The operation using the data for the recipe is configured in blocks (0 to 64). 1 channel is used for 1 item of data for
the recipe. 1 block is 16 channels.
The maximum number of blocks that can be configured is 64 blocks. The maximum number of device addresses that
can be configured for 1 channel is 8192 devices.
■ Settings
Edits the recipe settings for each channel.
3 Recipe Settings Dialog Box
HG3G
HG2G-5FHG5G-V HG4G-V HG3G-V HG2G-V HG2G-5T
HG4G HG1G HG1P
HG2J-7U
No.: Displayed as (Block No.)-(Channel No.). Double clicking the cell displays the Individual
Settings dialog box. For details, refer to “3.2 Individual Settings Dialog Box” on page 18-10.
Access to: Shows the save destination for the data for the recipe. Double clicking the cell switches between
Internal Memory and External Memory Device.
Trigger Setting: Shows the operation using the data for the recipe. When External Memory Device is selected
for Access to, double clicking the cell switches between Write-only, Read/Write, and Read-
only. Shows Write-only when Internal Memory is selected for Access to.
Read Trigger: Shows the device address that triggers saving the recipe file. Double clicking the cell displays
the Tag Editor. For the device address configuration procedure, refer to Chapter 2 “5.1 Device
Address Settings” on page 2-70.
This option can only be configured when Read/Write or Read-only is selected under Trigger
Setting.
Write Trigger: Shows the device address that triggers writing recipe values to device addresses. Double
clicking the cell displays the Tag Editor. For the device address configuration procedure, refer to
Chapter 2 “5.1 Device Address Settings” on page 2-70.
This option can only be configured when Read/Write or Write-only is selected under
Trigger Setting.
Recipe function: Shows whether or not to use the Recipe function. Double clicking the cell switches between
Enable and Disable.
To Next Page
Loading...
General