5 Password Input Screen
5-26 WindO/I-NV4 User’s Manual
The Password Input Screen is used to enter the user name and password required for switching user accounts when
the MICRO/I is in Run Mode. The size and coordinates of the screen can be specified and this screen can also be
moved on the Base Screen. This screen can only be created when the Use Security functions check box and the
Customize Password Input Screens check box in the Security dialog box are selected. If you are using the
Password Input Screen provided by MICRO/I, you do not need to create the screen. For details, refer to Chapter 23
“4.1 Entering the Password on the MICRO/I” on page 23-47.
5.1 Properties of Password Input Screen Dialog Box
● General Tab
■ Screen Type
Select Password Input Screen for the screen type.
You can only select the screen type when creating a new screen.
■ Number
Enter the screen number (3026 to 3033) of the Password Input Screen.
■ Font
Select the font to use for the title from the following items:
Western, Japanese, Simplified Chinese, Traditional Chinese, Hangul, Central European, Baltic, Cyrillic
This option can only be selected when Use Text Manager is cleared.
■ Use Text Manager
Select this to use text registered in the Text Manager for the screen title.
However, the text color is white, not the color set in the Text Manager.
■ Text ID
Specify the Text Manager ID number (1 to 32000) to use text registered in the Text Manager. Click
to display the
Text Manager.
This option can only be set when Use Text Manager is selected.
■ Title
Enter the Password Input Screen’s title. Maximum number is 40 characters. This title is displayed in the Password Input
Screen’s title bar.
This option can only be entered when Use Text Manager is cleared.
5 Password Input Screen
HG3G
HG2G-5FHG5G-V HG4G-V HG3G-V HG2G-V HG2G-5T
HG4G HG1G HG1P
HG2J-7U
To Next Page
Loading...
General