WindO/I-NV4 User’s Manual 23-49
4 Password Input
23
User Accounts and the Security Function
4.2 Entering the Password in WindO/I-NV4
When a user account assigned with Administrator is configured with a password, or when a dedicated password for
opening the project has been set, the Enter Password dialog box is displayed in WindO/I-NV4 as required and the
user is prompted to enter their password.
The operations that display the Enter Password dialog box are as follows.
• Opening projects
• Reusing screens
• Downloading a project data
• Downloading data to an external memory device
*1
• Downloading data to an external memory device
*1
while the MICRO/I is running
• Uploading a project data
• Uploading data from an external memory device
*1
• Delete data stored in the internal memory
• Deleting data in external memory device
*1
• Formatting
*2
external memory device
*3
● Enter Password Dialog Box
■ User Name
Selects the user name. This item can only be selected when multiple user accounts are registered.
■ Password
Enter the password. The password entered gets displayed as *(asterisks).
*1 USB flash drive inserted in USB1 for HG2J-7U, SD memory card for HG5G/4G/3G/2G-V, HG4G/3G and HG2G-5F,
USB flash drive for HG2G-5T and HG1G/1P
*2 HG5G/4G/3G/2G-V, HG4G/3G, HG2G-5F/-5T, HG1G/1P only
*3 SD memory card for HG5G/4G/3G/2G-V, HG4G/3G and HG2G-5F, USB flash drive for HG2G-5T and HG1G/1P
Enter the password for projects created with WindO/I-NV4 Ver. 1.11.4 or earlier using only 4 to 15
uppercase letters and numbers.
If Administrator or Other Operation password is
required, the following dialog box appears.
If dedicated password for opening project is required,
the following dialog box appears.
To Next Page
Loading...
General