3 Pie Chart
11-54 WindO/I-NV4 User’s Manual
3.2 Pie Chart Configuration Procedure
This section describes the configuration procedure for pie charts.
1 On the Home tab, in the Parts group, click Charts, and then click Pie Chart.
2 Click a point on the edit screen where you wish to place the Pie Chart.
3 Double-click the placed Pie Chart and a Properties dialog box will be displayed.
4 Change the settings on each tab as necessary.
The Options tab only appears in Advanced mode.
You can set the default for the Pie Chart on the Default Preferences tab of the WindO/I-NV4 Options
dialog box. For details, refer to Chapter 2 “Default Preferences Tab” on page 2-63.
To Next Page
Loading...
General