WindO/I-NV4 User’s Manual 29-31
3 File Copy Function
29
Data Transfer Function
3.2 File Copy Operating Procedures
The following methods can be used to copy files between or within the external memory devices (between an SD
memory card and a USB flash drive
*1
, between USB flash drives
*2
, and within an SD memory card
*1
or a USB flash
drive) inserted in the MICRO/I.
• Using the USB Autorun function
For details, refer to Chapter 31 “2 USB Autorun Function” on page 31-19.
• Using Key Buttons, Multi-Buttons, or Multi-Commands
For details, refer to “3.3 Using Key Buttons, Multi-Buttons, or Multi-Commands to Copy Files” on page 29-32.
• Using the File Manager in the System Mode on the MICRO/I
*1
For details, refer to “3.4 Using File Manager on the MICRO/I to Transfer Project Data” on page 29-33.
*1 HG5G/4G/3G/2G-V, HG4G/3G, HG2G-5F only
*2 HG2J-7U only
To Next Page
Loading...
General