WindO/I-NV4 User’s Manual 22-3
2 Multimedia Function Configuration Procedure
22
Multimedia Function
This section describes the configuration procedure for the Multimedia function.
2.1 Registering Movie Files
1 On the Configuration tab, in the System Setup group, click Multimedia.
The Multimedia Settings dialog box is displayed.
2 Select the ID to be used to register the movie file in Movie File List on the Movie tab. Click the File Path cell and
enter the file path of the movie file.
The maximum number is 250 alphanumeric characters.
Example: When specifying the movie file “sample01.mp4” that has been saved to the “MOVIE” folder in the External
Memory Device folder “HGDATA01”
Enter "sample01".
3 Repeat steps 2 to add all the movie files to play (1 to 64).
4 Click OK.
The Multimedia Settings dialog box closes.
This concludes the configuration to register movie files.
2 Multimedia Function Configuration Procedure
HG3G
HG2G-5FHG5G-V HG4G-V HG3G-V HG2G-V HG2G-5T
HG4G HG1G HG1P
HG2J-7U
To specify in the Open dialog box, double-click the cell or click the cell and click to open the Open
dialog box.
To Next Page
Loading...
General