IDEC WindO/I-NV4

WindO/I-NV4 User’s Manual 25-25
2 Monitoring on the MICRO/I
25
Monitor Function
3 Enter the value of device address and press ENT.
• Press Dec or Hex to change the display type for the value to enter.
• Press CLR to delete the entered value of device address.
• Press CAN to stop entering the value of device address.
The value of device address is changed.
Write Data
0 CLR CAN
ENT
123
456F
789E
ABCDDec Hex
Current
(word)
0
/
0H
LDR 12
1
2
• If a value of device is invalid, pressing ENT will not return you to Device Monitor.
• If the display type is decimal, A to F cannot be used.
LM
LDR
Data Del Select
0
00001
1
2
Device Monitor
Dec/HexDevice