To Next Page

To Previous Page

1 Web Server Function

28-4 WindO/I-NV4 User’s Manual

● Web Server Function Configuration Procedure

1 On the Configuration tab, in the System Setup group, click Project.

The Project Settings dialog box is displayed.

2 Configure the items on the Web Server tab.

■ Use System Web Page

The Remote Control page, Remote Monitor page or System Detailed Information page of MICRO/I can be accessd

from a web browser terminal.

■ Use Custom Web Page

The Custom Web Page saved in the external memory device of MICRO/I can be accessd from a web browser terminal.

Refer to “1.6 Custom Web Page” on page 28-12.

■ Execution Interval (msec)

Specifies the interval (0 to 5000 msec) for the MICRO/I to return data.

When the remote control function and the remote monitoring function place a load on MICRO/I operation, that load

can be reduced by increasing this value.

However, the display update speed in the web browser will become slower. Change this value if the display speed of

custom web pages is slow.

■ Port Number

Specifies the port number to use for the web server function.

■ Default Showing Page

Select the web page to display first when accessing the MICRO/I from a web browser terminal.

3 Click the OK button.

(Data Type)

Remote Control and Monitoring: Select the functions that are allowed when MICRO/I is accessed from a web browser

terminal.

When the remote control or remote monitoring function is enabled, you can have the

screen automatically change to the System Information page if no operations are

performed in the Remote Control page or Remote Monitor page for the specified

time. Refer to Chapter 4 “Remote Control and Monitoring” on page 4-66.

If Device Address is selected for (Data Type), note the following points:

• If the value of device address is set to 61 or higher, it will be treated as 60 minutes.

• Once a network connection is established between the web browser and the MICRO/I, the timeout period

cannot be changed. The timeout period needs to be set in Device Address before a web browser access

to the MICRO/I.

IDEC WindO/I-NV4 User Manual

Questions and Answers: