WindO/I-NV4 User’s Manual 35-13
1 HG2J-7U
35
MICRO/I Specifications
● Adjusting the Brightness
The brightness of the HG2J-7U display can be adjusted on the Adjust Brightness Screen.
1 Press the [Adjust Brightness] at the bottom of the Maintenance Screen. The Adjust Brightness Screen appears.
2 Press the [<<] and [>>] at the bottom the Adjust Brightness Screen to adjust the contrast to the optimal setting.
3 Press the [X] to close the Adjust Brightness Screen.
1.10 Software License Information
This product contains various open source software in addition to the software owned by IDEC Corporation.
Information about open source software can be obtained from the QR code printed on the back of the HG2J-7U.
Maintenance
System Mode
Device Monitor
Adjust Brightness
Maintenance
Adjust Brightness
To adjust the brightness in the System Mode, use the [<<] and [>>] buttons located at the bottom of the
Top Page.
SYSTEM MODE TOP PAGE
Run Offline Main Menu
<< >>
BRIGHTNESS 31
MAC Address 98:84:E3:8E:52:4B
IP Address 192.168.2.42(DHCP)
2021/JUN/29/TUE 08:57:36
ENG/JPNEtherIP
SNTP
MAC Address Invalid.
To Next Page
Loading...
General