IDEC WindO/I-NV4 User Manual

WindO/I-NV4 User’s Manual 8-169
9 Potentiometer
8
Buttons
■ Visible Condition
The Potentiometer is displayed while the condition is satisfied. The Potentiometer is hidden while the condition is not
satisfied.
Example: When Trigger Type is While ON and Device Address is LM0
While LM0 is 0, the condition is not satisfied and the Potentiometer is hidden.
While LM0 is 1, the condition is satisfied and the Potentiometer is displayed.
While OFF: Enables the Potentiometer when the value of device address is 0.
While satisfying the condition: Enables the Potentiometer when the condition is satisfied.
Data Type: Selects the type of data handled by the conditional expression for the input condition.
This option can only be configured if While satisfying the condition is selected for Trigger Type.
For details, refer to Chapter 2 “1.1 Available Data” on page 2-1.
Device Address: Specifies the bit device or the bit number of the word device to serve as the input condition.
This option can only be configured when While ON or While OFF is selected for Trigger Type.
Click to display the Tag Editor. For the device address configuration procedure, refer to Chapter 2
“5.1 Device Address Settings” on page 2-70.
Condition: Specifies the conditional expression for the input condition.
This option can only be configured when While satisfying the condition is selected for Trigger
Type.
Click to display the Trigger Condition Settings dialog box. For the conditional expression
configuration procedure, refer to Chapter 2 “5.2 Setting Conditional Expressions” on page 2-73.
Comment: Used for entering a comment for the input condition. The maximum number is 80 characters.
1
0
Enabled Disabled
Value of
device address
Disabled DisabledEnabled Enabled
Potentiometer
state
DisabledDisabledDisabled Enabled Enabled Enabled
Potentiometer
state
Satisfied
Not satisfied
Condition
LM0
:
MICRO/I
0
LM0
:
1
Show
Condition
Not
satisfied
Condition
Satisfied
Hide
When a hidden Potentiometer is redisplayed, the slider is displayed at the position specified by the value of
device address.

IDEC WindO/I-NV4 Specifications

General

Brand	IDEC
Model	WindO/I-NV4
Category	Organizer
Language	English