Mitsubishi FR-A800

(M) Monitor display and monitor output signal
PARAMETERS
363
5
GROUP
M
PTC thermistor
resistance
0.01 k 64 H40 40264
Displays the PTC thermistor
resistance when Pr.561 PTC
thermistor protection level  9999
(voltage monitor when Pr.561 =
9999).
PID measured
value 2
0.1% 67 H43 40267
Displays the PID control measured
value even when PID control is
disabled.
(Refer to page 510)
32-bit cumulative
power (lower 16
bits)
1 kWh — H4D 40277
Displays the 32-bit cumulative power
value in multiplies of 16 bits.
Monitoring can be performed via RS-
485 communication and
communication options. (To find the
monitor codes for each
communication option, refer to the
Instruction Manual of each
communication option.)
32-bit cumulative
power (upper 16
bits)
1 kWh — H4E 40278
32-bit cumulative
power (lower 16
bits)
0.01 kWh/0.1
kWh

— H4F 40279
32-bit cumulative
power (upper 16
bits)
0.01 kWh/0.1
kWh

— H50 40280
Remote output
value 1
0.1% 87 H57 40287

Displays the setting values of Pr.656
to Pr.659 (analog remote output).
(Refer to page 400.)
Remote output
value 2
0.1% 88 H58 40288
Remote output
value 3
0.1% 89 H59 40289
Remote output
value 4
0.1% 90 H5A 40290
PID manipulated
variable
0.1% 91 H5B 40291 
Displays the PID control manipulated
amount.
(Refer to page 510)
Second PID set
point
0.1% 92 H5C 40292
Displays the set point, measured
value, and deviation under second
PID control. (Refer to page 510)
Second PID
measured value
0.1% 93 H5D 40293
Second PID
deviation
0.1% 94 H5E 40294 
Second PID
measured value 2
0.1% 95 H5F 40295
Displays the second PID control
measured value even when the
second PID control is disabled.(Refer
to page 510)
Second PID
manipulated
variable
0.1% 96 H60 40296 
Displays the second PID control
manipulated amount.
(Refer to page 510)
Dancer main speed
setting
0.01 Hz 97 H61 40297
Displays the main speed setting
under step control
Control circuit
temperature
1°C 98 H62 40298 
Displays the temperature of the
control circuit board.
Without minus sign: 0 to 100°C
With minus sign: -20 to 100°C
Types of
monitor
Unit
Pr.52,
Pr.774 to Pr.776,
Pr.992
RS-485
communication
dedicated
monitor
(hexadecimal)
Modbus-
RTU
real
time
monitor
Minus (-)
display
Description