Raisecom ISCOM2600G-HI (A) Series - Page 104

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
2 Ethernet
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
73
Raisecom(config-gigaethernet1/1/5)#exit
Step 3 Configure the host interface mode and association of the primary VLAN with the secondary
VLAN on the host interface.
Configuration on GE 1/1/1 and GE 1/1/2, GE 1/1/3 and GE 1/1/4 are identical. Take GE 1/1/1
and GE 1/1/3 for example.
Raisecom(config)#interface gigaethernet 1/1/1
Raisecom(config-gigaethernet1/1/1)#switchport mode private-vlan host
Raisecom(config-gigaethernet1/1/1)#switchport private-vlan host-
association 10 30
Raisecom(config-gigaethernet1/1/1)#exit
Raisecom(config)#interface gigaethernet 1/1/3
Raisecom(config-gigaethernet1/1/3)#switchport mode private-vlan host
Raisecom(config-gigaethernet1/1/3)#switchport private-vlan host-
association 10 20
Checking results
Use the show vlan private-vlan command to show PVLAN configurations on the
ISCOM2600G-HI series switch.
Raisecom#show vlan private-vlan
VLAN ID: 10
Pvlan type: primary
Port-list: GE1/1/5,1/1/1-2
Associated-vlans: 20,30
VLAN ID: 20
Pvlan type: isolate
Port-list: GE1/1/5
Associated-vlans: 10
VLAN ID: 30
Pvlan type: community
Port-list: GE1/1/5,1/1/1
Associated-vlans: 10
Use the show interface interface-type interface-number switchport command to show
configurations of VLAN attributes on the promiscuous interface GE 1/1/5, community
interface GE 1/1/1, and isolated interface GE 1/1/3.
Raisecom#show interface gigaethernet 1/1/5 switchport
Interface: gigaethernet1/1/5
Reject frame type: none
Administrative Mode: promiscuous