Raisecom ISCOM2600G-HI (A) Series - Page 237

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
4 Ring network protection
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
206
Port: gigaethernet1/1/1
Vlanlist: 1
FaiureDetect:physical
MAID: --
MdLevel: 0
LocalMep: 0
RemoteMep:0
State/LCK/M:Active/N/N
Link State:failure
Protection Entity Information:
Port: gigaethernet1/1/2
Vlanlist: 1
FaiureDetect:physical
MAID: --
MdLevel: 0
LocalMep: 0
RemoteMep:0
State/F/M:Standby/N/N
Link State:failure
Wtr(m):5
Holdoff(100ms):0
Use the show ethernet line-protection aps command to show configurations of the 1:1 ELPS
APS on the ISCOM2600G-HI series switch.
Take Switch A for example.
SwitchA#show ethernet line-protection 1 aps
Trap State:Enable
C-Direction: Configuration Direction
N-Direction: Negotiated Direction
R-Signal: Requested Signal
B-Signal: Bridged Signal
Id Type C-Direction N-Direction Revert Aps State R-Signal B-Signal
------------------------------------------------------------------------
1-Local 1:1 bi bi yes yes SF-P null null